Backup Router Configuration
Backup Router Configuration

How to Backup Router Configuration to TFTP Server?

It is essential to know how to back up router configurations to TFTP server. It is similar to any backup we are instructed to make, and it aims at safe keeping a copy the software that keeps your router running smoothly. Routers are designed to transmit data packets. Networks It allows data to flow seamlessly from one router to the next until it reaches its destination. If you are aware, this function allows traffic to be directed on the Internet.

You can save all of your router’s configuration settings using the Backup Settings option. You can save the file to a folder on your computer. If your router has been reset, you can use this file to restore your settings.Factory default settings.

Before we get into the details of how to back up router configuration to TFTP server let’s first review the technical terms.

What is router configuration?

You are already familiar with what a router does for your system. The software configuration of a router allows it to perform a particular function or operate within a computer system. You can create a backup by using other routers or servers, and then secure it in your computer. This article will focus on how to back up router configurations to TFTP servers.

What is TFTP?

TFTP stands for Trivial File Transfer Protocol. TFTP uses UDP to transfer files, not TCP. Because it uses UDP that is not connectionless, TFTP file transfer is not recommended for networks with high latency such as the Internet. UDP does not use acknowledgements and is therefore faster than TCP. Understanding How to back up router configuration to TFTP Server You can speed up file transfers if you protect your router data.

What You Should Know About How to Back Up Router Configuration to TFTP Server

Now, we will need to learn how to back up router configurations to the TFTP server. Regular backups of router configuration files are important to ensure that they are safe in the event of a system failure. This can often cause damage to both the router’s hardware and software. How can knowing how backup router configuration to the TFTP server help your network avoid such losses?>You will need to rebuild a router configuration file that is complex from a simple recall in the event of a major system failure. This is not an easy task. How to back up router configuration to TFTP server gives you the ability to restore any configuration that was lost due to system failure. You can quickly fix your router using your backup file and it will be up and running in no time.

You can backup your router configuration to TFTP server by knowing how to do it. This will allow you to protect your configuration file whenever and however often you need to. Do backups need to be created regularly? Yes. You can expect to have a few network failures each year. It is possible for your system and you to lose your configuration file at any time. Although system failures are less frequent than system failures, it is important to have a backup. Human error, which is much more common than system failures, can cause the file to be lost completely or partially.

Secure router configuration files can also help protect passwords and IP addresses contained in your router. These files can be accessed even without logging in to the TFTP server making them unsecure.

Steps to followBackup Router Configuration to TFTP server and Restore a Configuration

This is a quick guide on how to back up router configurations to TFTP servers and then restore them. This involves copying a router’s configuration to a TFTP Server and back to another router.

You must first ensure that you meet the requirements.

A TFTP server is available on the network to your IP connectivity.

Let’s now move on to how do I backup my router configuration to the TFTP server.

Step 1
When prompted, issue the enable command at the Router> prompt and enter the password.
The prompt changes to Router# which means that the router has entered privileged mode.

Step 2
Copy the running configuration file into the TFTP server

CE_2#copy running-config tftp:
Name or address of remote host []
Filename of destination [ce_2-confg] backup_cfg_for_my_router
You can do it! !
1030 bytes copied within 2.489 seconds (395 bytes/sec).

Step 3

Use a text editor to open the configuration file. Remove any line beginning with “AAA” and search for it.
Notice: This is to disable any security commands that could prevent you from accessing the router.

Step 4
Copy the configuration file from TFTP server to a router in privileged mode (enable). This mode has a basic configuration.

Router#copy TFTP: Running-config
Name or address of remote host []
Source filename [] backup_cfg_for_my_router
Destination filename [running-config]?
Accessing tftp://…
Loading backup_cfg_for_router from (via FastEthernet0/0): !
[OK – 1030 Bytes]

1030 bytes copied within 9.612 seconds (107 bytes/sec).

Let’s now restore a configuration after we have learned how to backup router configurations to TFTP servers. This is a simple example of how to save the running configuration to TFTP server ( Every Sunday at 23:00,

Router(config)#kron policy-list Backup

Router(config-kron-policy)#cli show run | redirect
You can!
Router(config.#kron occurrence Backup by 23:00 Sunrecurring
Router(config-kron-occurrence)#policy-list Backup

Then verify. To confirm that the configuration file was copied to the destination router, use the show running-config command.


Please enter your comment!
Please enter your name here